» Products » Top Load For Jars (PTL 0107)

Top Load For Jars (PTL 0107)

PET jars are often used for packing and transporting water. As it is one of the safest medium to ensure the hygiene and quality of water, it is gaining popularity at a very fast pace. To assure the safety of water, it is first important to assure the safety of the jars. Due to large capacity, the jars experience huge load. They should not fail during the transit. Top load tester for jars is becoming a common sight in the industries where jars are manufactured and tested for different properties.

To test the quality of the jars, it is placed on the platform. A plate from the top applies load on the jar until it deforms. Or creep test can be performed on the jar. A load is applied on the jar and hold in this position for certain time. This test helps in assessing the quality of the jar during stacking. A pass / fail test is performed in this way. The top load tester for jars is made up of very rugged structure. It is made up of mild steel and has highly rust resistant coating. A motorised arrangement is used to move the plate up and down. This increases the shelf life of the machine and decreases the maintenance cost of the product. The machine is complying to national and international testing standards.



1 Star2 Stars3 Stars4 Stars5 Stars ( 4.67 out of 5)
Loading...Loading...

Rate this Product



    • The equipment is very strong fabricated with heavy cast iron base for easy and safe performance.
    • The machine is equipped with a highly sensitive load sensor which is strategically placed to enable perfect corner to corner load results.
    • Platform Size of the machine to place the sample is 600 mm x 600 mm.
    • The machine provides maximum compression Load up to 500kgf.
    • It offers the Least Count of 100 gms.
    • It is equipped with a motor of 1/4 HP that run on single phase 220V; AC power supply.
    • It is a very useful instrument to test stack ability of the finished PET Jars.
    • The equipment is supplied complete with calibration certificate and instruction manual.

    • The position of the bottle is inverted between two concave jaws for gripping support.
    • Switch off option with the machine after screening buckling in bottles.
    • Equipment supplied along with imported kit support
    • Fully automatic and motorized tester in digital format
    • Option of load sensor calibration.
    • Inverted straight plates for zero slip gripping support
    • Digital Display for accuracy and repeatability
    • Option for user to switch off the machine in case of buckling of the test sample.
    • In-house calibration facility
    • Graph Test report of Force Vs time
    • 10 Sample reports can be seen on 1 report
    • Test report email facility
    • Data Tabulation in Excel Sheet
    • Program profile for programming test parameters and product identification in test report
    • PASS/FAIL criteria can be programmed
    • Data output in graphical and digital display form.






Write a Review for Top Load For Jars (PTL 0107)






Subscribe to our Newsletter

Presto’s Visual Representation