Washing Machines are not always manufactured under one roof. Their parts are often manufactured by different companies. Therefore, it is very important to check their quality prior to their assembly. Majority of tests are conducted on exterior Plastic parts and the Nylon Gear in Washing Machine Motor. The exterior polymer parts face extreme weather conditions including rain, sunlight, humidity, moisture etc. while the machines are placed outside on display or placed in the bathroom, while in domestic use. Even the nylon gears of the motor are exposed to direct water and high temperature while functioning. Therefore, conducting a weathering test on washing machine exteriors plastic parts and the nylon gears is a must.
UV Accelerated Weathering Tester is a unique test cabinet which can imitate the real-life weathering conditions within a controlled chamber. Equipped with ultra-high technological features, it is considered to be the best-selling testing chamber worldwide. Suitable for testing plastic components, and the whole product. Considered best for testing plastic specimen which is of daily used machinery. It can easily detect the behaviour and possible damages of the plastic specimen under sunlight, rain and dew. It delivers an accelerated ageing condition to evaluate the resistance power of products against harsh environmental factors. Complies with ISO 11507, ISO 4892-1, ISO 4892-3, ASTM D 4587, ASTM D 4329, ASTM G-151, ASTM G-154, BS 2782:Part5, and JIS D 0205.
Exterior Plastic parts and nylon gears in washing machines can be easily inspected for its resistance towards harsh weathering condition in this automated and highly standardized UV Accelerated Weathering Tester.
Equipped with UV lamps, water spray and fluorescent lights to generate the effect of natural weather conditions. Can rapidly restart the UV radiation during a continuous and multiple test cycles also can renew water spray and relative humidity during the condensation cycle. Set test parameters are delivered with high accuracy in the chamber. Conduct precisely repeatable test cycles. HMI based touchscreen program operator screen is available on the chamber to control and manage test cycles as per requirement. One can watch the current test cycle conditions on screen. The UV light source can even simulate the shortest wavelength of sunlight. Test time and duration set, inside temperature, water spray numbers and time, accumulated test duration all can be seen on screen. Corrosion Resistant PT-100 sensor installed for assuring higher accuracy in test parameters.
Water supply level can be adjusted. Original UVA or UVB lamps are used for Perfect Results. Alarm and protection system is delivered for Creep-age, water-breaking, overloading, security door, and over-temperature. The operator can tele-control the chamber using a TCP/IP internet.