» Products » Melt Flow Rate-MFR-Model

Melt Flow Rate-MFR-Model

MFI-MFR

Melt Flow Index – MFR Model ( suitable for Method – A & B) is the advanced technology used for evaluation of flow properties of molten resins/polymer. Method A & B of ASTM D 1238 and ISO 1133 testing standards can be performed on the testing equipment to inspect MFI (Melt Flow Index), MVR (Melt Volume Rate) and MD (Melt Density) of the testing specimen.

The MFR Model is specially constructed and equipped with HMI based Touchscreen display for easy user operations.  It also offers to the record of live test data. The test parameters can be programmed on the display screen and the test can be run on an automated mode.



1 Star2 Stars3 Stars4 Stars5 Stars
Loading...Loading...

Rate this Product



    • Display: HMI Based touchscreen 7″
    • Temperature Range: Ambient to 400°C
    • Accuracy: ± 1°C
    • Least Count/Resolution: 0.1°C
    • Power: 220V, Single phase, 50 Hz
    • Sample Cutting mode: Automatic Motorized
    • Temperature Control: Inbuilt PID Temperature Controller
    • Timer: Inbuilt in HMI, Pre-set Timer up to 999 sec.
    • Inner Diameter of heating barrel (cylinder): 9.550mm ± 0.007mm
    • Inner Diameter of Die: 2.095mm ± 0.005mm
    • The diameter of piston head: 9.474mm ± 0.007
    • The material of Heating Barrel (Cylinder): Die Steel
    • Sample Cutting Motor 2 Torque 7Kg/ cm, 60RPM
    • Piston Travel: up to 25 mm least Count 0.02mm

    • Touchscreen display (HMI based) for live test inspection and easy programming of testing parameters.
    • Microprocessor based inbuilt PID controller for accuracy and repeatability.
    • Automatic sample cutting offered to avoid human error while cutting.
    • Easy selection and programming of test parameters with touchscreen configuration.
    • Uniform and consistent heating of cylinder allow a perfect test every time.
    • Temperature Vs Time graph of can be seen on screen
    • Program profile for selecting test parameters and performing the test.
    • The user can create product identification, test temperature, time etc. through HMI based program.
    • USB option available for extracting the test data (Pen drive not a part of the offer)






Write a Review for Melt Flow Rate-MFR-Model






Subscribe to our Newsletter

Presto’s Visual Representation