Tensile Tester Servo Manufacturer & Supplier in India

Tensile Tester Servo

Tensile Tester Servo

Tensile Tester Servo
4.9 out of 37

PDF Download
Youtube Link
MODEL:- TTM 100 (Servo)

Tensile testing is one of the most important methods of quality control for manufactured products. By measuring the force required to break or deform a material, we can determine its strength and other key mechanical properties. Presto has recently launched the Tensile Strength Tester Ser..read more

Book a free sample testing session now.

Features of Tensile Tester Servo

Presto Tensile Strength Tester Servo is a highly versatile testing instrument that can be used to test the tensile properties of materials. This system can measure the maximum load, elongation strength, yield strength, and other related mechanical properties of the materials with ease. Below we have listed the features of this quality testing equipment:

  • Load cell calibrated by NABL-approved proving ring/dynamometers

  • Cross-head travel length: 700mm grip to grip ( with standard vice-type grip)

  • Highly accurate micro-controller based system controls

  • Immediate analysis of results after the test with complete accuracy & Precision

  • Program profile for selecting test parameters and performing the test

  • Easy Data Management. Users can create product identification, test speed, test method, test mode, etc.

  • USB option available for storing test data (Pen drive not a part of an offer)

  • Data output in PDF and CSV file format.

  • Can be programmed home return with time defined

  • Calculate the Direct Tensile Strength with High precision Load cell interface

  • Calculate the Test results, Min. /Max. /Avg.

  • Single-column rugged structure

  • Safety limit switches for over-travel safety

  • Signature Calibration facility with Password

  • Hardened ball screws for frictionless movement 

Technical specifications

  • Power: 220V , Single, 50 Hz

  • Display: Touch Screen (7Inch)

  • Accuracy: ± 2% at full range (with master load)

  • Speed: 1 mm/min to 1000 mm/min (Changeable through speed controller)

  • Grip to Grip Separation: Min 60 mm and Max. 700 mm (applicable only with vice-type standard grip)

  • Load Capacity: Up to 500 Kgf

  • Safety: Yes(Limit Switches)

  • Grippers (optional added based on requirement): Vice Type (Standard grippers)

  • Material: Mild Steel

  • After the test Home return: Yes

  • Finish: Powder-coated Havel Gray & Blue combination finish and bright chrome/zinc plating for a corrosion-resistant finish

  • Dimensions: 400 x 500 x 1566 mm

*Optional: Pneumatic and Special Grips

Contact Us


Valid Invalid number
+
=

Tensile Tester Servo
4.9 out of 37

PDF Download
Youtube Link
MODEL:- TTM 100 (Servo)

Tensile testing is one of the most important methods of quality control for manufactured products. By measuring the force required to break or deform a material, we can determine its strength and other key mechanical properties. Presto has recently launched the Tensile Strength Tester Servo model to test the tensile properties of the materials. This quality lab testing instrument can measure the maximum load, elongation at break, and Young's Modulus of elasticity with high accuracy and repeatability.

Presto has recently launched a high-quality Tensile Tester Servo that helps the manufacturer in testing the breaking, tensile, and compression strength of various materials, components, and finished products. It is based on the principle of the Constant rate of Traverse (CRT). PRESTO Tensile Testing Machine HMI is manufactured under various test standards such as ASTM D412, ASTM D429-73, ASTM D624, ATM D638-01, ASTM D76, IS 13360-5-7, IS 3400(Part1-1987).

This high-quality lab testing instrument has been equipped with highly advanced features that make it easy for manufacturers to conduct tensile strength tests on the materials with ease. This powerful lab testing equipment will provide real-time analysis of the test results. This means that you can get an immediate indication of whether or not the specimen has failed the test and what the cause of the failure was.

Book a free sample testing session now.

Features of Tensile Tester Servo

Presto Tensile Strength Tester Servo is a highly versatile testing instrument that can be used to test the tensile properties of materials. This system can measure the maximum load, elongation strength, yield strength, and other related mechanical properties of the materials with ease. Below we have listed the features of this quality testing equipment:

  • Load cell calibrated by NABL-approved proving ring/dynamometers

  • Cross-head travel length: 700mm grip to grip ( with standard vice-type grip)

  • Highly accurate micro-controller based system controls

  • Immediate analysis of results after the test with complete accuracy & Precision

  • Program profile for selecting test parameters and performing the test

  • Easy Data Management. Users can create product identification, test speed, test method, test mode, etc.

  • USB option available for storing test data (Pen drive not a part of an offer)

  • Data output in PDF and CSV file format.

  • Can be programmed home return with time defined

  • Calculate the Direct Tensile Strength with High precision Load cell interface

  • Calculate the Test results, Min. /Max. /Avg.

  • Single-column rugged structure

  • Safety limit switches for over-travel safety

  • Signature Calibration facility with Password

  • Hardened ball screws for frictionless movement 

Technical specifications

  • Power: 220V , Single, 50 Hz

  • Display: Touch Screen (7Inch)

  • Accuracy: ± 2% at full range (with master load)

  • Speed: 1 mm/min to 1000 mm/min (Changeable through speed controller)

  • Grip to Grip Separation: Min 60 mm and Max. 700 mm (applicable only with vice-type standard grip)

  • Load Capacity: Up to 500 Kgf

  • Safety: Yes(Limit Switches)

  • Grippers (optional added based on requirement): Vice Type (Standard grippers)

  • Material: Mild Steel

  • After the test Home return: Yes

  • Finish: Powder-coated Havel Gray & Blue combination finish and bright chrome/zinc plating for a corrosion-resistant finish

  • Dimensions: 400 x 500 x 1566 mm

*Optional: Pneumatic and Special Grips