» Products » Salt Fog and Spray Tester for Kenya

Salt Fog and Spray Tester for Kenya


The Salt Fog and Spray Tester for Kenya is a major testing instrument offered by Presto that is best for testing the corrosion resistance offered by various materials. The instrument is used in a variety of industries including electrical, automobiles and many others. The machine is highly advanced with a very simple operation and uses salt spray and fog to create a virtual corrosive environment. The machine conforms to all the required standards and can be applied to international markets too.

1 Star2 Stars3 Stars4 Stars5 Stars

Rate this Product

Presto is a renowned supplier of Salt Fog and Spray Tester for Kenya that is majorly used for testing the corrosion resistance of different materials in different production verticals.  The machine is best for creating highly corrosive environments to test the excellence of the test specimen accurately. The test chamber of the machine is manufactured with high-quality fiber plastic for corrosion resistance. In addition, to that, there is an advanced control panel provided with the machine that is used to monitor the operating procedure of the machine.

The device is in strict adherence to all the required quality standards and is provided with an instruction guide as well as a conformance certificate.

    • The instrument is best for creating an artificial corrosive environment with a temperature range from ambient to 450
    • It is intended to give a high accuracy of temperature up to ±1%.
    • The temperature of the chamber is controlled using a sophisticated solid state temperature controller cum indicator that is easily programmable.
    • The apparatus is compiled with a highly sensitive RTD PT-100 sensor that has zero corrosion.
    • The device is assembled with moisture filter and air regulator that have a broad range of 0 to 30 psi.
    • The testing chamber of the equipment is manufactured with reinforced plastic fiber.

    • The laboratory testing instrument is well equipped with a TFT LCD display that has a good resolution and an aspect ratio of 16:9. The size of the screen is 7”.
    • The resolution of the TFT screen is 480 X 234 pixels that conform to IP 65.
    • The USB host helps in connection with the USB flash drive to the equipment.
    • The CPU provided of the instrument is an advanced ARM 9 32 bit CPU.
    • CF memory cards are supported by the instrument.
    • A set of 3 com ports is available for use.
    • There are eight function keys provided on the control panel.

    Relate Standards

    ASTM B 117 – 11, IS: 6910 (R 2003), JIS Z 2371, IS: 5528


    The following dimensions of the machine are available

    Inside Size

    • Korrox™  : 250 – 800 x 500 x 550 mm
    • Korrox™ : 450 – 1000 x 700 x 750 mm
    • Korrox™ : 1000 – 1600 x 700 x 800 mm

    Outside size

    • Korrox™ 250 model : 1800 x 800 x 1200 mm
    • Korrox™ 450 model : 2200 x 950 x 1450 mm
    • Korrox™ 1000 model : 2650 x 950 x 1550 mm

    Apart from that, there are other accessories available such as Air purging, Regulators, Cyclic timers, specimen trays, Gauges, and time totalizer.

Subscribe to our Newsletter

Presto’s Visual Representation