Computerized Tensile Testing Machine with COF Manufacturer

Computerized Tensile Testing Machine With COF

Computerized Tensile Testing Machine With COF

Computerized Tensile Testing Machine With COF
5 out of 389

PDF Download
Youtube Link
MODEL:- TTMC-LCD

The computerized tensile testing machine with COF is a testing instrument that is used for testing the coefficient of friction of packaging materials. This is done to determine the ease of moving or sliding the packaging material. This instrument is a combination of a computerized tensile testing..read more

Book a free sample testing session now.

Features of Computerized Tensile Testing Machine With COF

• Advanced load sensor sensing through advanced electronic LCD card.

• Speed Control through Variable Frequency drive. (150 / 300 mm per min.)

• Highly sensitive load sensor with linearity feature and repeatability

• Cross head travel length: 600 mm without grips

• Single column rugged structure

• Safety limit switches for over travel safety

• Hardened lead screws for frictionless movement

• Load cell calibrated by NABL approved proving ring/dynamometers

• Advanced self calibration feature for dual load cell different capacity.

• High accurate micro-controller based system controls.

• User Friendly operation with intuitive key pad and robust architecture

• Inbuilt Tensile & COF fixture is optional

• Easy Data Management. max. test result peak hold facility.

• USB compatible with high-speed data transfer

• Bright LCD display

• Print of test reports with thermal printer feature is available.

• Secured working with key protection feature

• Automatic end test/stop after completion of test.

• Immediate analysis of results after test with complete accuracy & precision.

Technical specifications

  • LCD Display 2 column with blue backlight
  • 220V AC, 5 Amp., Single phase, 50 Hz
  • ±2% at Full Load (with master load)
  • 150-300 mm/min through VFD drive
  • Min 25mm and Max. 500mm (applicable only with vice type standard grip)
  • 100 Kgf
  • 3 Kgf / 300 mm

Contact Us


Valid Invalid number
+
=

Computerized Tensile Testing Machine With COF
5 out of 389

PDF Download
Youtube Link
MODEL:- TTMC-LCD

The computerized tensile testing machine with COF is a testing instrument that is used for testing the coefficient of friction of packaging materials. This is done to determine the ease of moving or sliding the packaging material. This instrument is a combination of a computerized tensile testing machine and the coefficient of friction tester, hence gives the most accurate measurement of the coefficient of friction for a material or a surface. Presto offers an extremely accurate model of this instrument to cater the quality testing requirements of a variety of industries.

The Presto Computerized Tensile Testing Machine With COF (Coefficient of Friction) is a specialized device designed for testing the mechanical properties of materials. This machine is capable of measuring the tensile strength, elongation, and modulus of elasticity of various materials such as plastics, rubbers, metals, textiles, and composites.

In addition to its mechanical testing capabilities, this machine also features a COF testing function that measures the resistance of two surfaces to sliding against each other. This is particularly useful for testing the frictional properties of the materials such as packaging films, thermoplastic films, etc.

The Presto Computerized Tensile Testing Machine is equipped with advanced load sensor sensing through advanced electronic LCD cards. Besides this, it has a feature for speed control through a variable frequency drive.

This laboratory testing instrument has a user-friendly operation with an intuitive keypad and robust architecture that makes it easy for the manufacturers to conduct tensile strength tests on the materials.

Book a free sample testing session now.

Features of Computerized Tensile Testing Machine With COF

• Advanced load sensor sensing through advanced electronic LCD card.

• Speed Control through Variable Frequency drive. (150 / 300 mm per min.)

• Highly sensitive load sensor with linearity feature and repeatability

• Cross head travel length: 600 mm without grips

• Single column rugged structure

• Safety limit switches for over travel safety

• Hardened lead screws for frictionless movement

• Load cell calibrated by NABL approved proving ring/dynamometers

• Advanced self calibration feature for dual load cell different capacity.

• High accurate micro-controller based system controls.

• User Friendly operation with intuitive key pad and robust architecture

• Inbuilt Tensile & COF fixture is optional

• Easy Data Management. max. test result peak hold facility.

• USB compatible with high-speed data transfer

• Bright LCD display

• Print of test reports with thermal printer feature is available.

• Secured working with key protection feature

• Automatic end test/stop after completion of test.

• Immediate analysis of results after test with complete accuracy & precision.

Technical specifications

  • LCD Display 2 column with blue backlight
  • 220V AC, 5 Amp., Single phase, 50 Hz
  • ±2% at Full Load (with master load)
  • 150-300 mm/min through VFD drive
  • Min 25mm and Max. 500mm (applicable only with vice type standard grip)
  • 100 Kgf
  • 3 Kgf / 300 mm

How It Works?

View this video to learn how this Computerized Tensile Testing Machine With COF works?