» Products » Peel Strength Tester for Kenya

Peel Strength Tester for Kenya


Peel Strength tester for Kenya offered by Presto is a useful instrument used in packaging industries. The device is used for testing the peel adhesion strength of the adhesive materials that are used for packaging. The materials such as BOP tapes, packaging tapes, etc. must have good adhesion strength to deliver the best performance, and the peel strength tester helps in determining that. The device accurately analyzes the minimum amount of force required for peeling it off the substrate on which it is applied. The apparatus can also be used for conducting seal strength as well as a bond strength test. The appliance comes in compliance with all the quality standards which ensure that it provides most accurate test results.

1 Star2 Stars3 Stars4 Stars5 Stars

Rate this Product

Presto is a major supplier of Peel Strength Tester for Kenya, which is used widely in most of the packaging industries. The instrument is best for finding the adhesion strength of different materials and ensures the best quality of the products. The device not only conducts peel strength test but also conducts seal and bond strength tests with great accuracy.

The device is assembled with a digital peak load indicator and an S-type load sensor that helps in electronic calculation and reading of test results. The peak load indicator is also capable of storing 9 peak load values from the previous tests. The machine is provided to the users along with a user manual and a conformance certificate.

    • The maximum load exerting capacity of the device is 2 kilograms.
    • The Jaw separation speed offered by the appliance is 300 mm per minute.
    • The device has a least count of 2-gram force.
    • The overall size of the machine is 61 cm X 51 cm X 124 cm.
    • The appliance complies with the quality standard ASTM D 429-14.
    • The instrument weighs approximately 90 kg which becomes 120 kg after packaging of the instrument.
    • The device also comes with the thermal printer and Ac drives as optional accessories and can be availed on request.

    • The apparatus is usually used for performing Peel strength test on the test specimen with force application at an angle of 1800. Clients can also request for a fixture to perform the test at 900.
    • The apparatus has a high accuracy of ±2%.
    • The same device can be used efficiently for performing seal and bond strength tests.
    • The device comes with different templates for accurate preparation of specimen according to the standards.
    • The device comes with in-house calibration facility.
    • A peak load indicator- digital is provided with the testing device.

Subscribe to our Newsletter

Presto’s Visual Representation