Gelbo Flex Tester

Gelbo Flex Tester
4 out of 5

The Gelbo Flex Tester by Presto has been technically designed to determine the flex resistance of flexible barrier materials. The test is performed by applying repetitive strain to check the resistance of the material. The pin hole formation is the criteria for failure in integrity of one or more plies of a multi-ply structure. Through this test, the barrier properties such as gas or moisture in the flexible material can be evaluated. The flexible motion consists of twisting that is followed by compression or horizontal motion.

STANDARDS:

ASTM F392

read more
MODEL:- 0
PDF Download
Youtube Link
Contact Us

Product Description

The Gelbo Flex Tester by Presto has been technically designed to determine the flex resistance of flexible barrier materials. The test is performed by applying repetitive strain to check the resistance of the material. The pin hole formation is the criteria for failure in integrity of one or more plies of a multi-ply structure. Through this test, the barrier properties such as gas or moisture in the flexible material can be evaluated. The flexible motion consists of twisting that is followed by compression or horizontal motion.

STANDARDS:

ASTM F392

  • Global Standards followed are ASTM F392 conditioning to levels A-E
  • Twisting Angle is 400 degree or 440 degree
  • Twisting cycle is 45 cycles / min
  • Supports Gear Motor with 1/4 HP, 1440 RpmT
  • Power 230 Vac, 50 Hz,
  • User selectable test condition
  • LED display with Microprocessor system.
  • Available with measuring templates
  • Motorized mechanism ensures accurate test results.
  • Proper clamping of the test specimen supported by special ring fixtures
  • User-friendly electronic controls