Lab hot air oven is popularly used in different industrial applications and research as well. In industries like biotech, pharmaceutical and manufacturing units, it is used for curing, annealing, drying and sterilisation. However, sometimes application require different test conditions like different working temperature range and thus require a wide variety of ovens to fulfil the demands.
Dry sterilisation is the process of decontamination of the utensils and instruments after use. Popularly done in biomedical applications, hot air sterilisation is very much preferred over wet sterilisation. It is more suitable for glassware.
Curing is the process in which a material is exposed to heat to harden the composition. This can be done by combining air flow with heat. This is either used for drying or for treatment of sample prior further testing. It is widely used in plastics and rubber in polymer research, nanotechnology and semiconductor industries.
Annealing is the process of exposing of material to high temperature and then to low temperature. This is either done for enhancing the properties of the material or used while moulding or shaping of a material. In metallurgy, it is widely used to increase the ductility of the material. Ovens used for annealing require stainless steel chambers for annealing of plastic into catheter and syringes.
Drying of the sample without impacting its natural properties is an intricate task. Lab hot air ovens are a common sight in biomedical labs, clinical labs and other laboratories. It is either used for drying the samples to a certain level or for removing excessive moisture from the sample. Apart from this, it is used for drying the wet utensils and instruments.
In general lab, ovens are used for drying and heating. But in industries, it is used with some different perspective. It is widely used in the pretreatment of the sample before testing for tension, compression, deformation, deflection etc. Other prime uses of lab hot air oven are;
- Testing of electronics
- Analysing the shelf life of circuits at extreme temperatures
- Solder strength testing
- Accelerated heat testing
- Altering the chemical nature of polymers
Presto offers a wide range of Hot air oven for different industrial demands. Working with a different temperature range, these machines are made up of mild steel whereas internal chamber is made up of stainless steel. For more information about the product and customisation requirements, just contact our experts.