» Products » Melt Flow Index Tester in Saudi Arabia

Melt Flow Index Tester in Saudi Arabia


The Melt Flow Index Tester in Saudi Arabia is an effective testing instrument designed and manufactured by Presto and is used widely in plastic manufacturing industries. The Melt flow rate of any plastic material is a significant indicator of various properties of the material. By calculation of melt flow index, the manufacturers can easily analyze the quality and properties of the plastic resins they use for molding. Additionally, the melt flow index helps the manufacturers prevention of any manufacturing defects induced in the material during the molding process.

1 Star2 Stars3 Stars4 Stars5 Stars

Rate this Product

Presto is a leading exporter and manufacturer of highly advanced Melt Flow Index tester for Saudi Arabia. The instrument helps the manufacturers in the calculation of the melt flow rate of the plastic resins used in the molding process of plastic. The equipment is best for testing of plastic resins with high precision. The PID temperature controller and RTD PT- 100 sensor help in the precise operation of the machine. The laboratory testing instrument is provided with standard accessories and comes with user manual.

    • LED display of the device gives an accurate reading of the temperature of the heater.
    • A temperature range from ambient to 4000 C can be achieved through the instrument.
    • The least count of the equipment is 0.10
    • It has an accuracy of ±1%.
    • The piston head has a diameter of 9.74 mm.
    • The heater tube cavity has a diameter of 9.55 mm.
    • Additional dead weights are provided with the instrument in the following denominations: 1.2 kg; 2.16 kg; 3.8 kg & 5 kg. the dead weights are available on client’s request.
    • RTD PT-100 sensor is used for sensing the temperature with good accuracy.
    • PID temperature controller cum indicators are assembled with the machine.
    • The device has both manual and automatic sample cutting procedure.
    • The power supply required to operate the machine is 220-240 volts single phase AC.
    • The power consumption of the machine is 0.5 KW.
    • A laboratory digital weighing balance is also available with the machine as an optional accessory.

    • Microcontroller based working of PID temperature controller.
    • Digital timer comes with the instrument for accurate setting of sample cutting time.
    • Standard accessories are provided with the machine.

    Associated Standards

    • IS 10810-1984: Methods for test for cables part 23: melt flow Index
    • ASTM D 1238-13: Standard Test method for flow rates of Thermoplastic by extrusion plastometer
    • IS 2530-1963 (R 2003): Methods of test for polyethylene molding Materials & polyethylene Compounds

Subscribe to our Newsletter

Presto’s Visual Representation