Useful for checking flow properties of molten plastics. Complete with digital t5emperature indicator cum controller digital timer, cleaning tools & instructions manual.

Technical Details:

• Temperature Range:Ambient - 300°C
• Accuracy:0.1°C
• Timer:0-999 seconds

The PRESTO conditioned chamber is a ideal environmental chamber with the latest technology used to create the designated temperature. It has the lowest heat loss ratio due to high quality of insulation with imported glass wool. The chamber has a sealed compressor unit for high speed 'almost instant' cooling. Ergonomics and user ease are given a lot of importance while designing the system. It has complete DIGITAL controls.

Technical Specifications:

• Size:18" X 18" X 28"
• Humidity : Range 65% - 95% (tolerance of +/-2% RH)
• Temperature Range: Ambient to 65 deg.C
• Viewing : Viewing Glass incorporated for visual Examination of sample, with neoprene sealed lining.
• Timer : Digital Pre-Set solid state type Timer to set OFF Chamber after set number of hours. It has a built in battery for memory back of settings in case of power failure, the programming need not be done again.
• Hour Totaliser : Records total cumulative number of hours the instrument has run totally automated controls for zero attendance and auto shut off.

The ultra low temperature freezers or deep freezers are equipped with special air cooled compressor and CFC free refrigerators to give the efficient cooling and flow in the cabinet. High capacity air cooled condensers with aerodynamically shaped fans and washable condense filter keep fine free of dust to maintain utmost cooling efficiency. Features: • Size : 18" x 18" x 18", Chest type freezers with temperature up to minus 40 degree C. • Accurate temperature control & holdover capability. • Thick polyurethane insulation of 50 - 80 mm. • Minimum power consumption. • Digital electronic temperature controller cum indicator allows for easy readability. • Durable stainless steel interiors aid in maintaining temperature and makes cleaning easy. • Outer is made of Galvanized sheet finished with epoxy paint.

Spectrum Asia provides standardized and controlled environment for visual assessment of colors. It is suitable for all applications where there is a need to maintain color consistency and quality.

It allows a person to evaluate color samples under different light sources.

Technical Details:

• Artificial Daylight (D-65)
• Cool White Light (CWF)
• Tungsten Filament Light (Domestic Light Matching)
• Ultra Violet Black Light (Whites & Fluorescent Dyes)
• TL-84 Light - Triphosphor fluorescent Light (Point of Sale)

The use of Multiple Light Sources is the only way to detect Metamerism - a phenomenon where samples appear to match under one Light source but are distinctly different under another.

Spectrum Asia is a universally preferred choice for Faster, Closer and Accurate Color Matching.

Color Temperature:

D-65 Light : 6500° K
CWF Light : 4100 K
TL-84 Light : 4000 K
T.F. Light : 2300 - 2800 K
U.V.B. Light : Ultra Violet

Technical Specifications:

Light sources:

• Artificial Daylight Fluorescent Lamps (D-65) :02 Nos. (18 W)
• Tungsten Filament Lamps (Inc A Lamps) : 04 Nos.(40W Each)
• Cool White Fluorescent Lamp (CWF) : 01 No. (18 W)
• Triphosphor Fluorescent Lamp (TL-84) Point of Scale : 01 No. (18 W)
• Ultra-Violet Black Lamp : 01 No. (18 W)
• Voltage : 220 / 110 V AC , 50/ 60 Hz.
• Power consumption: 1/4 kw

Technical Details:

• Capacity : 250 Kg Least Count 100 gm
• Type : Floor standing, C.R.T. Type.
• Testing Area : Tension Compression, Flexural.
• Grip to Grip Separation : Minimum 25mm. and Maximum : 700mm. Two sets supplied with the machine.
• Cross Head Speed : 50mm - 500mm / min. With Servo Motor Variable Speed.
• Speed Control : Through Graphic user interface PC.
• Cross Head Travel Length : Overall travel length 1000mm without Grips.
• Load Sensor : Universal 'S' Type
• Load Sensor Accuracy : +0.5% of the Load Cell capacity. Calibrated by NPL approved proving ring / dynamo meters.
• Load Sensor Sensing : Auto-detect / sensing through advance electronics. Electronic Auto-Zero
• Over Load / Travel Safety : Auto stop through software : 10% above load cell capacity. / Built in
• Systems Controls : Advance Micro - controller systems tensile card - 1927 or 945a, 16bit ADC & DAC
• Computer & Printer : Computer and Printer is must. Pentium or Higher version. Not part of the offer.
• Software : Window based Tensile software program / specially designed to perform & store basic Tensile & compression test
• Power Requirement : Stabilized, 220-240V AC, 50Hz, Single Phase.

Digital tensile strength tester for plastic, rubber & metal is based on the constant rate of traverse (CRT) principle. The sample is held between two jaws, the upper one is a stationary jaw while the other end is made to move at a known fixed speed with the help of Motor, Gear Box and Lead Screw arrangement (75mm or 300mm per minute). The load exerted on the Stationary jaw is sensed by a sensor connected with load cell which directly indicates the load in Digital form in kgs. The Elongation is digitally displayed.

Technical Specifications:

• Capacity of the Tester : 0 - 250Kg/ 0 - 25N
• Sensitivity : 100 Gms.
• Speed of Machine : 75 mm per. Minute, 300 mm per. Minute
• Minimum jaw separation : 25 mm
• Maximum jaw separation : 750 mm
• Motor : ¼ HP Single Phase 220 / 110 V AC Supply.
• Power Consumption : 1KW

Related Standards:

• BS 1610
• BSES 1002-3
• ASTM E-4