The Presto® Salt Spray (Fog) Tester has been designed strictly as per the relevant standard to asses the ability of rust proofed components to withstand corrosion due to atmospheric conditions. It is Double Walled. (Stainless Steel 316 inside & Outside Mild Steel Duly Powder Coated)

Work Space : Rectangular Inside Size: 900x750x600mm.

Temperature Range : Ambient to 60 degree Celsius. (Temp. Requirement 35 +/- 2 Degree C)

Temperature Accuracy : +/-1 degree celsius.

Temperature Control : Solid State Digital Programmable Temperature Controller cum indicator with special Zero Corrosion PT 100 sensor

Material : Stainless Steel Main body Grade 316 inside & Outside M.S. Powder coated with transparent lid (toughened Glass) to observe sample under test.

Air Regulator : A moisture cum oil filter and air regulator ranging from 0 to 30 psi is provided.

Pressure Gauge : A calibrated pressure gauge is provided for measuring inlet air pressure.

Atomiser : A state of the art zero choke inert material atomizer is provided for reliable atomizing.

Solution Storage : A temperature controlled non-corrosive storage tank for solution storage is provided with immersion heater fitted in it.

Tests : Different types of tests like salt spray, acetic spray, alcoholic spray and any other chemical sprays with different % of salt concentrations as per ASTM/ISS/IS 900/IEC-68 and Qm333 can be tested.

Panel : A separate user friendly panel is provided with the following controls:

1) Solid State Digital Programmable Temperatuer indicator cum controllers with atuo-cut off facility of the main chamber and the reservoir.

2) Digital Preset Timer with Memory backup and automatic shut off after pre-setduraiton for setting test duration upto 999 Hrs.

3) Mounted Pressure gauge; regulator value and air filter.

4) Imported Hour meter for recording total (cumulative) hours of chamber run since installation/difference time log.

5) Light indicating ON/OFF Mains.

Calibration : All measuring instruments are calibrated and certificates are issued with traceability

Electrical Requirements : Single Phase 220 Volt 50Hz 3KW approx.

Related Standards : JIS Z2371; DIN 50021; ASTM B 117; IS:5528; IS:6910; ISO:3768

The Presto® Salt Spray (Fog) Tester has been designed strictly as per the relevant standard to asses the ability of rust proofed components to withstand corrosion due to atmospheric conditions. It is Double Walled. (Stainless Steel 316 inside & Outside also Stainless Steel) with glass wool insulation.

• Work Space : Rectangular Inside Size: 900x750x600mm.
• Temperature Range : Ambient to 60 degree Celsius. (Temp. Requirement 35 +/- 2 Degree C)
• Temperature Accuracy : +/-1 degree celsius.
• Temperature Control : Solid State Digital Programmable Temperature Controller cum indicator with special Zero Corrosion PT 100 sensor
• Material : Stainless Steel Main body Grade 316 inside & Outside Stainless Steel with transparent lid (toughened Glass) to observe sample under test.
• Air Regulator : A moisture cum oil filter and air regulator ranging from 0 to 30 psi is provided.
• Pressure Gauge : A calibrated pressure gauge is provided for measuring inlet air pressure.
• Atomizer : A state of the art zero choke inert material atomizer is provided for reliable atomizing.
• Panel : A separate user friendly panel is provided with the following:

1) Solid State Digital Programmable Temperatuer indicator cum controllers with atuo-cut off facility of the main chamber and the reservoir.

2) Digital Preset Timer with Memory backup and automatic shut off after pre-setduraiton for setting test duration upto 999 Hrs.

3) Mounted Pressure gauge; regulator value and air filter.
• Electrical Requirements : Single Phase 220 Volt 50Hz 3KW approx.

Related Standards:

• JIS Z2371
• DIN 50021
• ASTM B 117
• IS:5528
• IS:6910
• ISO:3768

To check the color value of textiles, paper, leathers, painting materials. The objective quality control of color during production. The color measurement and recording of products supplied by supplier to check for conformity specification. It is a portable equipment equipped with an external sensor probe having a 45/0 degree color measuring geometry. It uses the spectral analysis method to determine the color of the sample. It has user friendly features to get the color value ( R; G; B or H; S; L); comparison of color value is easy for two measurement materials. Built in CAL (Calibration) button makes self calibration easy; and a white color calibration card is included in the kit. Hand Held housing case is included; the entire system runs on 9 V battery.