» Products » Box Compression Tester – HMI

Box Compression Tester – HMI

Model No : PDBC 600

Presto’s Box Compression Tester – HMI model is the perfect machine to measure the compressive strength of the boxes. This machine is equipped with a motorized arrangement to move the compression plates up and down. The upper plate is movable. The box which is to be tested for its compressive strength is kept in the platform. The upper movable plate applies load on the box until it deforms. The pressure applied to deform the box is measured and displayed on the HMI screen.



1 Star2 Stars3 Stars4 Stars5 Stars
Loading...Loading...

Rate this Product

A load cell is used to apply the variable load. The conveniently placed HMI screen allows the operator to do the profile programming for different test parameters. The machine is designed with two strong columns structure for synchronized movement of the compression plate. The plates are made to move using a motorized arrangement. Over travel protection is the USP of the Presto’s Box Compression Tester – HMI. As soon a test is completed, the plate will come to halt right at that moment, thus deliver accurate test results and save power consumption.

This machine is highly preferred in manufacturing of corrugated boxes. It helps in assessing the behavior of the box in real working conditions. Apart from that, manufacturer can issue safety guidelines to handle the boxes aptly. So that, a product does not fail during the transportation, storage and handling, it becomes mandatory to perform the box compression test.

It helps in determining the

  • Strength of the box
  • Stiffness of the box
  • Stacking load capacity of the box


  • Platform Size : 450 x 450 mm

    • Capacity : 500 kgf
    • Test Speed : 12.5 ± 2.5 mm/min
    • Load Cell : 200 gm
    • Accuracy : ± 2% full scale (with master load. )
    • Display : HMI TFT 4.3 ” Screen
    • Power : 220V , Single / Three phase, 50 Hz

     

    Platform Size : 600 x 600 mm

    • Capacity : 500 kgf
    • Test Speed : 12.5 ± 2.5 mm/min
    • Load Cell : 200 gm
    • Accuracy : ± 2% full scale (with master load. )
    • Display : HMI TFT 4.3 ” Screen
    • Power : 220V , Single / Three phase, 50 Hz

     

    Platform Size : 1000 x 1000 mm (1 x 1 Mtr.)

    • Capacity : 1000 Kgf
    • Test Speed : 12.5 ± 2.5 mm/min
    • Load Cell : 500 gm
    • Accuracy : ± 2% full scale (with master load. )
    • Display : HMI TFT 4.3 ” Screen
    • Power : 220V , Single / Three phase, 50 Hz

    • Stores and displays peak hold value
    • Safety limit switch for upward and downward movements
    • Made from mild steel for increased life
    • Powder coated body with zinc finishing for corrosion protection
    • Variable programmable test speed
    • USB port available for connecting USB drive
    • Data recording with compression force vs deflection data reading
    • Easy profile programming for different test parameters






Write a Review for Box Compression Tester – HMI





Subscribe to our Newsletter

Presto’s Visual Representation