» Products » Melt Flow Index Tester in Bahrain

Melt Flow Index Tester in Bahrain

The plastic material is used in almost every industry, and the melt flow rate measurement helps to evaluate the property and efficiency of a high-quality plastic. The manufacturers need to test viscosity, chemical structure and so forth to ensure the proper quality of the plastic materials. Presto’s Melt Flow Index Tester for Bahrain is the most preferred instrument to test the MFI of plastic resins. The device provides the best, simple and convenient operation.



1 Star2 Stars3 Stars4 Stars5 Stars
Loading...Loading...

Rate this Product

Presto is the name of the brand, gaining customer’s trust for many years and manufacturing the Melt Flow Index Tester for Bahrain to test the melt flow index of the plastic granules. The instrument is primarily used for the plastic industries and is equipped with a digital display for indicating the temperature of the heater with good accuracy. The device has a PID controller and RTD PT-100 sensors that effectively controls the heat produced in the heater. The instrument is set as per the all the standard guidelines and is supplied with a conformance certificate as well as a user manual.



    • The temperature range is from ambient to 4000 C with the least count 0.10
    • High accuracy of ±1%.
    • The diameter of the piston head is 9.47 mm and heater cavity is55 mm.
    • The LED display provides accurate information about the heater cavity temperature.
    • The machine has additional dead weights for applying additional load on the sample. The dead weights can be provided on client’s request.
    • The RTD PT-100 sensor is used for precise heater temperature.
    • PID temperature controls the temperature of the heater cavity.
    • The sample cutting is performed manually as well as automatically.
    • The instrument requires 0.5 kilowatts power.
    • The digital weighing balance is an optional accessory.

    • The operation of PID temperature controller is based on microcontroller.
    • Digital timer aids in the accurate setting of sample cutting.
    • The standard accessories are also provided with the tool.

    Standards

    • IS 10810-1984: Method of test for cables part 23: melt flow Index
    • ASTM D 1238-13: Standard Test method for Thermoplastic by extrusion platometer flow rates
    • IS 2530-1963 (R 2003): Methods of test for polyethylene molding Materials & polyethylene Compounds






Write a Review for Melt Flow Index Tester in Bahrain





Subscribe to our Newsletter

Presto’s Visual Representation